Flex Two Arm Bow Holder

$29.95

Flex Two Arm Bow Holder

Auger has a cork screw tip and heat-treated CNC machined threads,

The first pivot point is at the tree.

The Bow holder hook is 4” long and rubber coated,

The gear / crossbow hook prongs are 4” long, 3 ¼” apart and rubber coated,

Each of the two (2) steel arms are 8” long,

A camera mount arm or ThermaCELL® mount can be added at any of the pivot joints,

The unit has an anti-rotation nail on the auger,

The steel components are Cathodic Acrylic coated over an epoxy primer

You may have experienced the annoyance with screw-in bow holders that have the first arm sticking straight out from the tree that can’t be moved. This quite often places it in the way and limits your flexibility in positioning your bow

The State River Two Arm Bow Holder has the first pivot 3” from the tree giving you greater flexibility in positioning your bow and having more shoulder room.

Like all of our screw in products the auger has a cork screw tip and CNC machined threads for a quick start and easy installation. This is a real plus when you are trying to balance on you stand while installing your bow holder.

The bow holder and the gear / crossbow hook are rubber coated to minimize noise and protect you bow. The position of these two parts can be swapped so you have two (2) pronged crossbow holder on the front of the holder and the single prong bow holder becomes the gear hook in the back. The crossbow holder has two (2) – 4” long prongs that are 3 ¼” apart.

A camera mount arm or ThermaCELL® mount (both sold separately) can be added at any of the pivot points to hold your camera, ThermaCELL® or Ozonics™ unit or most other devices that have a ¼ -20 threaded insert. This allows you to customize your hunting space to meet your needs.

Flex Armstrong, anti rotation nail, HR.j

The First Pivot point is at the tree

Other uses for the Flex Two Arm Bow Holder

Flex, Two Arm, Crossbow, Single Gear Hoo

Flex Two Arm Crossbow Holder

The Flex Two Arm Bow Holder was designed so you can easily convert it to a Crossbow Holder.

To make this change you remove the single bow hook located at the end of the second 8” arm. The two (2) pronged Crossbow holder which is being used as a gear hook at the auger end of the bow holder is also removed. You then install the two (2) pronged crossbow holder on the end of the second 8” arm and install the single pronged bow holder at the auger end where it becomes your gear hook. The complete change over takes less than five minutes and does not require any tools

Customize Your Hunting Space

You have personal preferences when it comes to hunting. You have different items that you want to have with you, and you want those items placed in specific locations.

We have taken a building block approach so you can customize your space.