Flex Two Arm Crossbow Holder -
-
Auger has a cork screw tip and heat-treated CNC machined threads,
-
The first pivot point is at the tree,
-
The crossbow holder fingers are 4” long, 3 ” apart and rubber coated,
-
The gear hook / single bow hook is 4” long and rubber coated,
-
Each of the two (2) steel arms are 8” long,
-
A camera mount arm or ThermaCELL® mount can be added at any of the pivot joints,
-
The unit has an anti-rotation nail on the auger,
-
The steel components are Cathodic Acrylic coated over an epoxy primer
You may have experienced the annoyance with screw-in bow holders that have the first arm sticking straight out from the tree that can’t be moved. This quite often places it in the way and limits your flexibility in positioning your bow
The Flex Two Arm Crossbow Holder has the first pivot 3” from the tree giving you greater flexibility in positioning your bow and having more shoulder room.
Like all of our screw in products the auger has a cork screw tip and CNC machined threads for a quick start and easy installation. This is a real plus when you are trying to balance on you stand while installing your bow holder.
The crossbow holder and the gear / bow hook are rubber coated to minimize noise and protect you bow. The position of these two parts can be swapped so you have a single 4” long rubber coated hook for your standard bow and the two-prong crossbow holder becomes the gear hook. The crossbow holder has two (2) 4” long fingers that are 3” apart.
A camera mount arm or ThermaCELL® mount (both sold separately) can be added at any of the pivot points to hold your camera, ThermaCELL® or Ozonics™ unit or most other devices that have a ¼ -20 threaded insert. This allows you to customize your hunting space to meet your needs.
The First Pivot Point is at the tree
Other uses for the Flex Two Arm Crossbow Holder
Flex Two Arm, Bow Holder, XB Gear Hook.jpg”
The Flex Two Arm Crossbow Holder was designed so you can easily convert it to a Bow Holder.
To make this change you remove the crossbow hook located at the end of the second 8” arm. The single prong bow holder which is being used as a gear hook at the auger end of the bow holder is also removed. You then install the single prong bow holder on the end of the second 8” arm and install the two (2) prong crossbow holder at the auger end where it becomes your gear hook. The complete change over takes less than five minutes and does not require any tools.
Customize Your Hunting Space
You have personal preferences when it comes to hunting. You have different items that you want to have with you, and you want those items placed in specific locations. We have taken a building block approach so you can customize your space.
With a ThermaCELL® Mounted in the rear
Requires the purchase of One (1) - ThermaCELL® Mount Kit
With a ThermaCELL® Mounted in the center
Requires the purchase of One (1) - ThermaCELL® Mount Kit
With a ThermaCELL® mounted In the center and a Go Pro® In the front
Requires the purchase of One (1) - ThermaCELL®Mount Kit and one (1) – Arm 4 Kit
With a ThermaCELL® in the rear and a Go Pro® in front
Requires the purchase of one (1) - ThermaCELL® Mount Kit and one (1) – Arm 4 Kit
With a ThermaCELL® in the rear and a Go Pro® in the front on an 8” Extension Arm
Requires the purchase of one (1) - ThermaCELL® Mount Kit, one (1) – Arm 4 Kit and one (1) – 8” Extension Kit
With an Ozonics™ in the rear
Requires the purchase of one (1) – Arm 4 Kit
With an Ozonics™ in the rear and a Go Pro® in front
Requires the purchase of two (2) – Arm 4 Kits
With an Ozonics™ in the middle
Requires the purchase of one (1) – Arm 4 Kit
With an Arm 4 in the middle, any device that has a ¼ - 20 insert on the bottom can be mounted on this arm
Requires the purchase of one (1) – Arm 4 Kit
With a Go Pro® in front
Requires the purchase of one (1) – Arm 4 Kit
With a Go Pro® in the center
Requires the purchase of one (1) – Arm 4 Kit
2020 Chevy Productions